Filter
Top Products
9b. BREWING ONE CUP
If you press the Rotary Dial, the ENA will produce a 5 oz. cup of
coffee in normal strength.
READY, NORMAL, 1 CUP, READY
ENA 5 only: If you brew one cup we recommend turning the
coffee spout to the one-cup position (Fig. 9). Coffee will flow
from one spout into your cup.
9c. BREWING TWO CUPS
The display shows READY.
•
Turn the Rotary Dial until the display shows 2 CUPS and press
the Rotary Dial. The display shows
2 CUPS and starts grinding
and brewing. READY.
Please note: When selecting 2 CUPS the ENA will always grind
in position STRONG and will double the programmed volume,
e.g. if the programmed volume is 5 oz. the ENA will brew a total
of 10 oz. of coffee.
Note: After brewing 2 cups the ENA will always return to the 1
cup mode.
ENA 5 only: When using two cups, make sure the coffee spout
is turned to the 2-cup position (Fig. 10).
9d. OVERRIDING CUP SIZE AND COFFEE STRENGTH
If you want to brew a different cup of coffee just once you can
override the propgrammed strength and volume before brewing.
This is convenient when you desire a stronger or milder cup of
coffee or a guest wants the coffee prepared differently.
• Turn the Rotary Dial. It will show you the following options:
MILD, NORMAL, STRONG, STEAM, 2 CUPS. If you do not
select any of these options, the display will return to
READY
after approx. 7 seconds.
Example: To prepare a STRONG. 2 OZ espresso. READY.
• Turn the Rotary Dial to STRONG and push the Rotary Dial. The
display shows STRONG and starts grinding. 1 CUP.
• When the area around the Rotary Dial lights up in red, turn the
dial and select
2.0 OZ. The display changes from 2.0 OZ to
1 CUP and the ENA will brew 2 oz. of coffee. READY.
The next time you push the Rotary Dial, the ENA will brew
according to the pre-programmed setting.
Please note: When you select the 2 CUP setting (chapter 9c.)
you can only override the cup size by turning the dial during
brewing. The size shown is always per cup (e.g. if you choose 3
oz., the ENA will brew a total of 6 oz.).
10. USING PRE-GROUND COFFEE
You can also use pre-ground coffee, bypassing the grinder. This
is convenient if someone requests decaf, or flavored coffee.
Important:
• Never add more than two level measuring spoons of pre-
ground coffee.
• Never fill the funnel with instant coffee.
• If the pre-ground coffee is ground too fine, it can block the
system. No or very little coffee will come through the coffee
spouts.
• If you fill less than 1/2 a measuring spoon of coffee into the
funnel the display will show
NOT ENOUGH PRE-GROUND
and the ENA will stop the operation and return to READY.
15.