Filter
Top Products
13
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example, 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ During the steam draw-off operation, the message STEAM is
displayed
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ STEAM
READY
As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
Before CLOSE TAP, steam may still escape the system.
13. Dispensing Cappuccino with the
Easy-Auto-Cappuccino Frother
Cappuccino comprises of one third each of Espresso, hot
milk and milk foam. You produce the milk portion with the
Easy-Auto-Cappuccino Frother (15).
When steam is drawn, a vacuum is produced which, with the
aid of the Easy-Auto-Cappuccino Frother (15), draws in the
milk and produces milk foam.
To ensure perfect function, the Easy-Auto-Cappuccino
Frother (15) must be cleaned regularly.
Make sure that the nozzle is correctly fitted. If the nozzle be-
comes blocked with particles of milk residue or is incorrectly
assembled, a danger can arise during use whereby the nozzle
may jump off.
Ⅲ When using for the first time, remove the protective cover from
the Easy-Auto-Cappuccino Frother (15) (Fig. 6). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
Ⅲ Remove the milk pipe from the Welcome Pack and connect it to
the Easy-Auto-Cappuccino Frother (15).
Ⅲ Insert the other end of the milk pipe into a Tetra Pak of milk or
connect it to a milk container (Fig. 7).
Ⅲ Place a cup under the Easy-Auto-Cappuccino Frother (15)
(Fig. 7).
A useful addition is available for all lovers of milk speciali-
ties in the form of high-quality vacuum milk containers.
They keep the milk cool the whole day long and are opti-
mally suited to the design of your IMPRESSA.
All original JURA accessories can be obtained from the
specialist shop.
Ⅲ Press the steam pre-selection key (8).
Ⅲ HEATING
Ⅲ STEAM
READY
Ⅲ To draw off steam open the steam/hot water draw-off tap (14)
(Fig. 13). The milkfoam is prepared.
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example, 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Adjust the steam dispensing time to suit the size of your
cup.
E