Filter
Top Products
14
Ⅲ During the steam draw-off operation, the message STEAM is
displayed.
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed.
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ STEAM
READY
At any time, you can stop dispensing steam at an earlier
stage by closing the tap for dispensing steam/hot water (14).
As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
Due to the system design, steam can still escape and some
milk may continue to drip before the TAP is closed.
Ⅲ Now, move your cup with the milk foam and place it under the
coffee spout and dispense the required coffee product. (Fig. 8)
Your Cappuccino is ready.
13.1 Cleaning the Easy-Auto-Cappuccino Frother
To ensure that the Easy-Auto-Cappuccino Frother functions
perfectly, you should rinse it with water each time after
preparing milk.
You will not be prompted by your IMPRESSA to rinse the
Easy-Auto-Cappuccino Frother.
13.2 Rinsing the Easy-Auto-Cappuccino Frother
Ⅲ Carefully pull off the Easy-Auto-Cappuccino Frother.
Ⅲ Dismantle the Easy-Auto-Cappuccino Frother (15) into its indi-
vidual parts (Fig. 16)
Ⅲ Thoroughly rinse all parts of the nozzle under running water.
Ⅲ Reassemble the Easy-Auto-Cappuccino Frother (15) and refit it
on to your IMPRESSA.
13.3 Cleaning the Easy-Auto-Cappuccino Frother
To ensure that the Easy-Auto-Cappuccino Frother(15) func-
tions perfectly, you should clean it daily if you have prepared
milk foam.
You will not be prompted by your IMPRESSA to clean the
Easy-Auto-Cappuccino Frother (15).
You can obtain the JURA Auto-Cappuccino Cleaner from
the specialist shop.
Ⅲ Place a container under the Easy-Auto-Cappuccino Frother (15).
(Fig. 9)
Ⅲ Fill a second container with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
Ⅲ Dip the milk pipe into the second container with the Auto-Cap-
puccino Cleaner. (Fig. 9)
Ⅲ Press the steam pre-selection key (8).
Ⅲ HEATING
Ⅲ STEAM
READY
Ⅲ To draw off steam open the steam / hot water draw-off tap (14)
(Fig 13).
Ⅲ Draw steam until the container with the Auto-Cappuccino Clea-
ner is empty.
This procedure cleans the Easy-Auto-Cappuccino Frother and the
milk pipe.
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ STEAM
READY