Jura Capresso IMPRESSA E50 Coffeemaker User Manual


 
15
16. Messages
Display Cause Action
System empty Fill the system (see chapter 4.1)
System too hot after drawing off steam Re-set to coffee ready
Selector switch in wrong position Re-set to correct position
General troubles 1. – Switch off
– Disconnect from mains power
– Connect machine to mains power
– Switch on machine
2. Have the machine checked at a Jura service centre
Machine needs rinsing Rinsing the machine
Water tank empty Fill water tank
Float faulty Rinse out tank, descalcify tank if necessary
Grounds container full Empty grounds
Drawer replaced too early Wait at least 10 seconds and replace drawer
Drip tray not inserted properly or missing Replace correctly
E