Filter
Top Products
10
Ⅲ Fill the water tank (14) with cold, fresh tap water and place it
back into the machine.
Ⅲ Place a sufficiently large receptacle (min. 0.5 litres) under the
pivoting steam spout (23) and press one of the Steam keys
to start the filter rinsing process.
Ⅲ FILTER RINSING
Ⅲ Filter rinsing stops automatically.
Ⅲ SELECT PRODUCT
You can also trigger a change of filter manually from the
Maintenance menu at any point in time (only if the filter has
been activated) - see Chapter 13.3.
6. Rinsing the machine
If the coffee machine is switched off and has cooled down,
you will be prompted to start a rinsing cycle when switching
the machine back on. The rinsing cycle starts automatically
when you switch the machine off.
Ⅲ PRESS RINSE
Ⅲ Place a cup under the coffee spout (18).
Ⅲ Press Rinse .
Ⅲ MACHINE RINSING
Ⅲ SELECT PRODUCT
You can also trigger a rinsing cycle manually from the Main-
tenance menu at any point in time (see Chapter 13.3).
7. Making coffee
(1 espresso, 2 espressos, 1 coffee, 2 coffees)
Ⅲ SELECT PRODUCT
Ⅲ Place 1 or 2 cups (as required) under the coffee spout (18) and
press a key of your choice , , , . The pre-brewing
process (I.P.B.A.S.) moistens the coffee powder, briefly inter-
rupts the flow of hot water and then begins with the actual brew-
ing process.
Ⅲ 1 ESPRESSO (example)
NORMAL (example)
Ⅲ The coffee brewing process stops automatically as soon as the
set amount of water has run through.
Ⅲ SELECT PRODUCT
To stop the brewing process prematurely, press any of the
product keys.
You can change the amount of water while the machine is
brewing coffee. Open the programming door. Turn the
Rotary Switch (4) until the display indicates the required
amount (ML). The amount of water can be selected in incre-
ments of 5 ML.
The amounts given in ML are approximate values and may
vary from the effective quantity.
7.1. Making coffee with pre-ground coffee powder
Never use water-soluble instant coffee.
Ⅲ SELECT PRODUCT
Ⅲ Place 1 or 2 cups (as required) under the coffee spout (18) and
open the programming door (3). Press the selection key for pre-
ground coffee .
Ⅲ FILL
POWDER / SELECT PRODUCT
Ⅲ Now fill 1 or 2 level scoops of pre-ground coffee into the filler
funnel for pre-ground coffee (17).
Ⅲ Then press a product key of your choice.