Jura Capresso IMPRESSA XS90 Coffeemaker User Manual


 
12
To stop the process prematurely, turn the switch (22) back
to .
You can also change the amount of water set while the
machine is brewing coffee. Open the programming door.
Turn the Rotary Switch (4) until the display indicates the
required amount (ML). The amount of water can be selected
in increments of 5 ML.
The amounts given in ML are approximate values and may
vary from the effective quantity.
10. Drawing off steam
Make sure the nozzle has engaged properly. If the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
To ensure perfect operation, clean the 2-stage frothing jet
(24) regularly. Use the opening provided on the handle of the
measuring spoon for the purpose to unscrew the 2-stage
frothing nozzle (Fig. 14). Thoroughly rinse the 3 parts under
running water.
Steam can be used for heating liquids and frothing milk for
cappuccino. When heating liquids, make sure the 2-stage
frothing jet (24) is pushed up. To froth liquids, push the
2-stage frothing jet (Fig. 5) downwards, turning it slightly.
A small amount of water leaks from the jet when you start
frothing. This does not affect the result, e.g. when frothing
milk.
There might be some initial splashing when drawing off
steam. The steam jet gets hot. Avoid direct contact with the
skin!
SELECT PRODUCT
Place a cup under the pivoting steam spout (23) and dip the
2-stage frothing jet (24) in the milk to be frothed or the liquid to
be heated.
Press the Steam Portion key .
STEAM PORTION
You can stop the process any time by pressing the Steam Portion
key .
SELECT PRODUCT
You can set the duration of drawing off steam in 1-second
increments with the Rotary Switch (4).
11. Frothing milk
The IMPRESSA is ready to froth milk when both Steam key lights
light up constantly.
If the lights are off, press one of the two Steam keys .
11.1 Frothing one portion of milk
(with the 2-stage frothing jet)
SELECT PRODUCT
Pour milk into a jug or similar receptacle.
Dip the 2-stage frothing jet (24) into the milk and press the
key.
STEAM PORTION
The steam dispensing process stops automatically.
11.2 Frothing milk
(with the 2-stage frothing jet)
SELECT PRODUCT
Pour milk into a jug or similar receptacle.