Jura Capresso S7 Coffeemaker User Manual


 
15
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
POWDER
QUANTITY
Now press the Rotary Switch (4) to start programming.
SELECT
PRODUCT
Then press a product key of your choice.
NORMAL (example)
ⅥⅥⅥ
_ _ _ +
Now turn the Rotary Switch (4) until the required amount of
powder is set.
STRONG (example)
ⅥⅥⅥⅥ
_ _ +
Confirm the selected setting by pressing the Rotary Switch (4).
POWDER
QUANTITY
Now turn the Rotary Switch (4) until the following message is
displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming
mode.
SELECT PRODUCT
13.5 Setting the amount of water for coffee,
espresso and coffee à la carte
The system’s basic settings include pre-defined amounts of water
(coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte
145 ml). However, these can be modified as required.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4) un-
til you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
WATER
QUANTITY
Press the Rotary Switch (4) to activate the program item.
SELECT
PRODUCT
Press a product key of your choice.
1 ESPRESSO (example)
60 ML
Turn the Rotary Switch (4) to adjust the amount of water and
then confirm your setting by pressing the Rotary Switch (4).
WATER
QUANTITY
Turn the Rotary Switch (4) until the following message is dis-
played:
EXIT
Press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
E