Filter
Top Products
19
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ UNIT ON
—:—
Ⅲ Turn the Rotary Switch (4) to set the hours.
Ⅲ UNIT ON
07:00 (example)
Ⅲ Press the Rotary Switch (4) to confirm the hours and to activate
the minutes.
Ⅲ UNIT ON
07:00
Ⅲ Turn the Rotary Switch (4) to set the minutes.
Ⅲ UNIT ON
07:15 (example)
Ⅲ Press the Rotary Switch (4) to confirm the minutes.
Ⅲ UNIT ON
07:15
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
Ⅲ SELECT PRODUCT
If the IMPRESSA is switched off with the power switch
(27), you will need to set the time again next time you switch
the machine on. The machine will prompt you to do so.
13.12 Programming the automatic switch-off time
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ OFF AFTER
5 HRS
Ⅲ Now press the Rotary Switch (4) to start programming.
Ⅲ OFF AFTER
5 HRS
Ⅲ Turn the Rotary Switch (4) to set the switch-off time.
Ⅲ OFF AFTER
4 HRS (example)
Ⅲ Confirm the set switch-off time by pressing the Rotary Switch
(4).
Ⅲ OFF AFTER
4 HRS
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming mode.
Ⅲ SELECT PRODUCT
13.13 Programming the language
Ⅲ SELECT PRODUCT
Ⅲ Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
Ⅲ FILTER
NO or YES
Ⅲ Turn the Rotary Switch (4) until the following message is dis-
played:
Ⅲ SPRACHE
DEUTSCH
Ⅲ Now press the Rotary Switch (4) to start programming.
E