Jura Capresso S7 Coffeemaker User Manual


 
25
Once started, the decalcifying program must not be inter-
rupted.
Always wait until the decalcifying agent has been used up
and the tank is empty. Never fill in additional decalcifying
agent.
SELECT PRODUCT
DE-SCALE MACHINE
Press Rinse until the following message appears:
EMPTY TRAY /
EMPTY GROUNDS
Empty out the drip tray (1) and integrated coffee grounds bin.
TRAY
MISSING
Place the empty, clean drip tray (1) and integrated coffee
grounds bin back into the IMPRESSA.
AGENT IN TANK /
PRESS STEAM
Take out the water tank (14). Empty out any remaining water.
Completely dissolve the content of one blister (3 tablets) in a
receptacle containing 0.6 litres of water, and pour the mixture into
the water tank. Place the water tank back into the machine.
Remove the 2-stage frothing jet (24) or Professional-Cappuccino
Frother from the machine (if attached).
Place a tall receptacle under the pivoting steam spout (23) and
press one of the Steam keys .
MACHINE
DE-SCALING
You will hear an acoustic signal.
OPEN TAP
Place the receptacle under the hot water spout (25).
Turn the Hot Water key (22) to the symbol.
MACHINE
DE-SCALING
You will hear an acoustic signal.
CLOSE TAP
Turn the Hot Water key (22) to the symbol.
MACHINE
DE-SCALING
You will hear an acoustic signal.
EMPTY TRAY /
EMPTY GROUNDS
Empty out the drip tray (1) and integrated coffee grounds bin.
TRAY
MISSING
Place the empty, clean drip tray (1) and integrated coffee
grounds bin back into the IMPRESSA.
RINSE WATER TANK /
FILL WATER TANK
Thoroughly rinse out the water tank and fill it with fresh cold
tap water. Then place it back into the IMPRESSA.
PRESS STEAM
Place a receptacle under the pivoting steam spout (23).
Press one of the Steam keys .
MACHINE
DE-SCALING
You will hear an acoustic signal.
OPEN TAP
Place the receptacle under the hot water spout (25).
Turn the Hot Water key (22) to the symbol.
E