Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity. Print only what is inside the frame.
3 DGR 31031- 140506
Assembly page 3/48
Fax +32 2 359 95 50
operation. Do not store any item on top of the appliance when in
operation.
17. Do not clean with metal scouring pads. Pieces can break off the
pad and touch electrical parts involving a risk of electric shock.
18. Do not place any of the following materials in the oven: paper,
cardboard, plastic, and the like.
19. To disconnect the appliance, put all knobs in off (or 0) position
and remove the plug from the wall outlet.
20. Never attempt to use the rotisserie without the lid or grease tray in
place.
21. The lid of this appliance gets very hot. Always wear oven gloves /
mitts when handling the lid or accessories.
22. Warning: this appliance generates heat and can let steam
escape during use; proper precautions must be taken to prevent
the risks of burns, injury to persons or damage to property.
23. If the appliance accidentally falls or becomes immersed in water,
unplug it immediately and do not reach into the water.
24. Extreme caution must be used when removing the drip tray or
disposing of hot grease.
25. Do not operate in presence of explosive and/or flammable
fumes.
26. To reduce risk of injury, unplug the appliance before inserting
food, and keep unplugged when not in use.
27. Be sure to provide adequate space for air circulation above and
on the sides during use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit
into the polarized outlet only one way. If the plug does not properly
fit into the outlet at first, reverse it. If it still does not fit, contact a
competent qualified electrician. Do not attempt to modify the plug in
any way.