Filter
Top Products
13
Care, Cleaning and Storage
Cleaning After Use
1. Ensure the blender has stopped
operation by turning the Speed
Control Dial to ‘OFF’.
2. Switch off at the power outlet and
unplug the power cord.
3. Hold the motor base with
one hand and with the other
hand turn the blender jug anti-
clockwise and in the opposite
direction of the '
' symbol on
the motor base. Lift the blender
jug upwards from the motor base
to remove.
4. Ensure all liquids have been
removed from the blender jug.
5. Follow the ‘Disassembling the
Blender’ section on page 7 to
remove the blade holder from
the glass jug.
6. Wash the blender jug, lid, inner
cap, silicone seal and Removable
Blade Holder in warm, soapy
water, rinse and dry thoroughly.
WARNING: Blades must
be handled carefully as
they are sharp!
NOTE: Do not place any part of
the blender in the dishwasher.
NOTE: Do not immerse the motor
base, power cord or power plug
in water or any other liquid.
Cleaning the Motor Body
The motor body can be cleaned
with a soft, damp cloth (do not use
abrasive agents or cloths which can
damage the surface). Dry and polish
with a soft, lint free cloth.
Storage
Before storing, thoroughly wash and
dry all removable parts.
Assemble the blender and store on
the kitchen bench or in an easy to
access cupboard.
Store out of reach of children.
Store the appliance upright.
Do not store anything on top of
the appliance.