Filter
Top Products
4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Blitz2Go
TM
Blender
• Carefully read all instructions before operating
the Kambrook Blitz2Go
TM
Blender for the first
time and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the Blender for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this Blender.
• Do not place the Blender near the edge of a
bench or table during operation. Ensure the
surface is level, clean and free of water and
other substances. Vibration during operation
may cause the appliance to move.
• Do not use the Blender on a sink drain board.
• Do not place the Blender on or near a hot gas
or electric burner, or where it could touch a
heated oven.
• Handle the Blender with care – remember the
blades are razor-sharp and should be kept out
of the reach of children.
• Always ensure the Blender is completely
assembled before operating. The Blender
will not operate unless properly assembled.
• Do not use attachments other than those
provided with the Blender.
• Do not attempt to operate the Blender by
any method other than those described in
this booklet.
• Always secure the removable blade holder
onto the bottle before attaching to the
motor base.
• Ensure the ‘PULSE’/‘BLITZ’ button is not pressed
and the Blender is switched off at the power
outlet and the power cord is unplugged
before attaching the assembled bottle.
• Always operate the Blender with the
assembled bottle in position.
• Keep fingers, hands, knives and other utensils
away from moving blades.
• Ensure the motor and the blades have
completely stopped before disassembling.
Ensure the ‘PULSE’/‘BLITZ’ button is not pressed
and the Blender is switched off at the power
outlet and the power cord is unplugged from
the power outlet before attempting to move
the Blender, when not in use, if left unattended
and before disassembling, cleaning or storing.
• Care should be taken when removing
the food from the bottle by ensuring the
motor and the blades have completely
stopped before disassembling. Ensure the
‘PULSE’/‘BLITZ’ button is not pressed, the
appliance is switched off at the power outlet
and unplugged before removing the bottle.
The bottle should then be unlocked from
the motor base and the removable blade
holder unscrewed from the bottle. The
blended contents can then be either
consumed from the bottle or removed.