Kambrook KBL20 Blender User Manual


 
7
Using Your Kambrook Blender
Before First Use
Before using your blender for the first
time, remove all packaging material
and promotional labels. Ensure the
appliance is switched off at the
power outlet and the power
cord is unplugged.
Unscrew the removable blade holder
from the plastic bottle (See Fig.1).
Fig. 1
Wash the plastic bottles, lids, stainless
steel blades with removable blade
holder in warm soapy water with a
soft cloth. Rinse and dry thoroughly.
NOTE: The stainless steel blades
with removable blade holder is
not dishwasher safe.
NOTE: Kambrook does not
recommend the plastic bottles
are put in the dishwasher.
Dishwashers vary in the market,
some dishwashers may have
hot spots that distort the plastic.
NOTE: There are rubber seals
situated under the drinking
lids and inside the removable
blade holder to prevent leaking.
In case these seals come out,
wash in warm soapy water, rinse
and dry thoroughly. Correctly
refit the seals into the lid or
inside the blade holder before
using.
The motor base can be wiped
with a damp cloth. Dry thoroughly
after cleaning.
Assembly and Operation of
Your Kambrook Blender
1. Place the motor base on a flat,
dry surface. Ensure that the
blender is switched off at the
power outlet and the power cord
is unplugged.
2. Choose the 600ml or 300ml sized
bottle to be used for blending.
3. Put the ingredients to be blended
inside the chosen bottle.
4. Screw the removable blade
holder onto the top of the
chosen bottle by turning the
removable blade holder in a
clockwise direction. Make sure
that the removable blade holder
is securely tightened to the bottle
(See Fig. 2).
IMPORTANT: Blades must
be handled carefully as
they are sharp!