Filter
Top Products
11
Fig. 6
WARNING: All blades
must be handled
carefully as they are
sharp!
Correct Placement of the
Processor Lid
Fig. 7
Place the lid on top of the bowl, align
the indicator line on the lid with the
circle
on the bowl.
Turn the lid clockwise – moving the ‘lid
locking tab’ into the slot near the top
of the motor unit (See Fig. 7) - until the
indicator line on the lid is aligned with
the circle
on the top of the bowl. A
“click” sound will be heard, to indicate
it is correctly fitted.
Using the Slicing/
Grating Discs
a. Select the desired slicing/grating
disc and assemble into the disc
holder. (See Fig. 4). To fit the stainless
steel disc onto disc holder, fit left
side of disc (when writing is towards
you), with locating tab into holder,
then push right side down firmly
until it locks into place. (See Fig.
5). Fit the end without the push up
marking in first. Then push the “push
up” side down firmly until it locks
into place.
Locate Tab
Fig. 4
Fig. 5
b. To remove disc, hold disc away and
place thumbs underneath disc at
top of disc marked “push up” and
push out. (See Fig. 6). The disc may
be tight for the first few times.
KFP95_IB_FA.indd 11 16/11/09 4:40 PM