Filter
Top Products
12
NOTE: The 850W Food Processor
will not operate unless the
processing bowl and lid are
correctly locked into position.
Insert Slot
Lid Locking Tab
Fig. 8
✓
Fig. 9
Ensure the Speed Selection Dial is in
the ‘OFF’ position. (See Fig. 9).
Insert power plug into a 230V or 240V
power outlet and turn the power on.
The processor is now ready to use.
To begin processing/slicing/grating
turn the speed selection dial from
the ‘OFF’ position to either the LOW,
MED or MAX speed, depending on
your requirements. The speed can be
changed at any time during
the process.
For short bursts of power, whilst
processing, use the PULSE setting.
For slicing and grating – ensure that
the food items you want to slice or
grate are of a suitable size to be fed
through the food chute.
Place the food inside the chute and
push down with the ‘food pusher’.
NOTE: Never push down any
foods with your hands and
do not put your hands down
the food chute at any time
during processing.
For using the processing blade – with
the ingredients inside the processor
bowl, start the unit on LOW speed
moving to MAX if necessary. Before
commencing ensure that the ‘food
pusher’ is in place to avoid splashing
from the food chute. Ingredients can
be added through the food chute
whilst processing.
If ingredients stick to the sides of
the processor bowl during processing,
turn the Speed Selection Dial to
the ‘OFF’ position, switch off at the
power outlet, remove lid and then
push the food back onto the blades
using the plastic spatula to scrape
down the sides of the bowl. Then
recommence processing.
NOTE: Do not over fill the
processor bowl past the MAX
line for solids and past the
750ml mark for liquids.
When processing is complete,
turn to the ‘OFF’ position. Wait until
the blades have stopped rotating
before removing the lid, blades or
processor bowl.
Assembly and Operation of Your
850W Food Processor continued
KFP95_IB_FA.indd 12 16/11/09 4:40 PM