Filter
Top Products
5
Important Safeguards For All
Electrical Appliances
• Carefully read all instructions before operating
the appliance and save for future reference.
• Remove and safely discard all packaging
material and promotional labels before using
the appliance for the first time.
• Fully unwind the power cord before use.
• Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid, unless it
is recommended in the cleaning instructions.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance, by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in anyway.
Return the entire appliance to the nearest
authorised Kambrook Service Centre for
examination and/or repair.
• Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than its
intended use. Do not use in moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice
• Always turn the appliance to the OFF
position, switch off at the power outlet
and unplug at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and remove
the power cord, if detachable, from the
appliance and allow all parts to cool.
• Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
• Position the appliance at a minimum
distance of 20cm away from walls, curtains
and other heat or steam sensitive materials
and provide adequate space above and on
all sides for air circulation.
• Always remove the beaters or dough hooks
from the mixer before cleaning.
• Care should be taken when removing the food
from the stainless steel mixing bowl by ensuring
the motor and the beaters or dough hooks
have completely stopped before disassembling.
Ensure the Speed Selector Control is in the
‘OFF’ (0) position, the Stand Mixer is switched
off at the power outlet and unplugged before
unlocking and moving the Stand Mixer motor
into the upright position. The beaters and dough
hooks should be released from the Stand Mixer
motor body before attempting to remove the
processed food from the mixer bowl and the
beaters or dough hooks.
• Always ensure that the Stand Mixer motor
body is attached to the support arm when not
in use and before storing.
• Always ensure that the Speed Selector Control
is in the ‘OFF’ (0) position, the power is switched
off at the power outlet and the power cord
is unplugged from the power outlet before
attempting to move the Stand Mixer, before
assembling or disassembling the mixer, when the
mixer is not in use and before cleaning or storing.
• Do not move the Stand Mixer whilst in
operation.
• Always switch off the Stand Mixer and
disconnect from the power outlet before
removing attachments, changing accessories
or approaching parts that move in use.
• Do not leave the Stand Mixer unattended
when in use.
• Do not place any part of the Stand Mixer in
the dishwasher or microwave oven.
• Keep the Stand Mixer clean. Follow the
cleaning instructions provided in this book.