Filter
Top Products
ASSEMBLYcont.
"x
,t On the Bowl Cover are the load chute, food chule lid, and movable loop, which serves
as a housing for the food pusher Also included is the shaft conlainlng the spring
mechanism that controls the slide button used to lock the food chute tid into place
These are part of the Bowl Cover assembly
5 Place the Bowl Cover Assembly onto the Bowl Align the arrow on the Cover and the
unlock Icon on the Bowl (see Fig- 2 and 2a) Turn the Cover counterclockw}sa towards
the center front until itclicks
NOTE: There is only one position for the Bowl Cover to lock onto Bowl The unit will no!
operate if the Bowl Cover does not lock onto the Bowl, o[ ff the Food Chute Lid does not
lalch onto the Food Chute
6 Make sure the food chute lid is securely latched inlo place.
7 To open the Food Chute Lid pull the Slide Release Button out Lifl the Food Chute Lid
and Movable Loop (see Fig 3 and 3a) up and back to open
/_Flgo3
Fig,3a
B. When the food pusher is not being used to feed items down through Ihe food chute,
It should be locked into place tn the movable loop This Is usually the case when using
blades down in the bowllnstead of discs at the top of the bowl.
When locked together, the food pusher and movable loop can also act as one larger food
pusher To lock the food pusher into the movable loop. slide the tab located on the food
pusher into the slot on Ihe dm of lhe movabte loop
5