Kenmore 100.82002 Food Processor User Manual


 
TO SLICE OR SHRED cont.
6 Turn control knob switch to ON, then press down lighl_ybul firmly on food pusher and
movabia loop to lead items down and onto slice/shred d{sc. When the chute isempty.
turn control knob switch to OFF, unplug, allow the disc to stop rotating, and unlatch the
food chule lld
7 To process more food, place food into the foodchute and repeat above steps When
finished, press OFF, unplug, and allow disc to stop rotating
_ CAUTION: Before opening the Bowl Cover Assembly, be sure
you
have turned the unit OFF and unplugged the cord,
8 Open bowl cover by turning clockwise, and remove disc with disc siam..
_ ARNING: Slicing/Shredding Disc is very sharp_ Use caution when
handling,
9. Unlock Bowl by turning clockwise towards Unlock icon and lifl bow! of[
Emply the processed food
TO PROCESS LONG AND THIN FOOD ITEMS
_ CAUTION: Make surecontrol knobswitch is turned to OFFand unit is
unplugged beforeuse. Neveruse your hand to pushfoDd into processor°
The use of heavy pressurewillnotspeed operation°
t Lock theBowlonto the Baseas describedin Assembly
2 Slide lhe disc stem down onto the center post of the base, then place the slice/shred
disc. with the desired side facing up for either slicing or shredding, onto lhe disc stem
and push down At this point the disc will be at the top of the bowl
_ WARNING: WARNING: Slicing/Shredding Disc ts sharp,
very
Use caution when handling.
3. Lock bowt cover assembly onto bowl
4. Make sure the food chute lid is latched into place