Filter
Top Products
Setting Oven Controls
(continued)
1. Push in and turn the griddle control in either direction to the desired setting
Start most cooking operations on a higher setting; then turn to a lower setting
to finish cooking
2. The controls do not have to be set exactly on a particular mark Use the marks
as a guide and adjust the control as needed
3.. The griddle indicator light glows when the griddle is on,. A quick glance at
the light when cooking isfinished isan easy check to be sure the control isturned
off.,
4 Preheat for a few minutes (until butter melts or beads of water dance on the
griddle).
5 Use only nylon or plastic spatulas, spoons, etc. Metal can scratch the non-
stick finish.
6 Make sure the griddle is turned OFF when cooking is finished Leaving the
griddle ON will damage it.
Approximate Griddle Settings
Bacon HI
Grilled Sandwiches HI
Pancakes HI
Hamburgers MED-Ht
Eggs MED
Use precaution when
using the automatic timer. Use the
automatic timer to cook cured or
frozen meats and most fruits and
vegetables. Foods that can easily spoil,
such as milk, eggs, fish, poultry or
meat, should be chilled in the
refrigerator. Even when chilled, they
should not stand in the oven for more
than two hou[s before cooking begins,
and should be removed promptly when
cooking is completed.
Timed Bake
The automatic timer will turn the oven on and off at the times you select in
advance
The oven can be programmed to start immediately and shut off
automatically, or, to start at a delayed time and shut off automatically
!. Be sure that the clock shows the correct time of day
2. Place the food in the oven and close the door,.
3 Pushand hold START button until the control beeps and the words
START TIME appear in the left side of the display.
4. Turn set knob clockwise until the desired starting time is reached, Time will
increase or decrease in 5 minute increments,
olf you want to start now and shut off automatically, then go to step #5 If
you want to stag at a delayed time and shut off automatically, you must
change the start time.
5. Push start button, control will beep once and the words STOP TIME will
appear in the left side of the display,
6. Turn SET knob until desired stop time is reached,
7. Push START button. The control will beep once and the word AUTO will
flash in the upper left of the display
8 Turn the temperature control to the desired temperature.
9 Turn the selector to T. BAKE,
°When desired start time is reached, the control will beep once and the
word AUTO wil! start flashing and remain on during baking.
°To cancel automatic baking at any time, push the STOPICANCEL button
twice
°At the end of automatic baking, the timer will sound for 3 seconds, AUTO
will flash rapidly to indicate the end of automatic cycle, The alarm wilt
continue to sound t/2 second every 10 seconds for t5 minutes or until
STOPICANCEL button is pushed.
-To review, start and stop time settings before automatic cycle begins, push
and hold START button until START TIME appears; push second time to
display STOP TIME and once more to return to automatic control mode
°When changing the start and stop times, time wilt increase and decrease in
5 minute increments