Filter
Top Products
SECTION 2 HOW YOUR WATER FILTER WORKS
A. FACEPLATE TIMER FEATURES
S
E
C
T
N
RECHARGE NOW
For times you expect to use more
water than usual, use the RE-
CHARGE NOW feature. Press the
RECHARGE button and hold in
for three seconds. "RECHARGE
NOW" begins to flash in the dis-
play and a recharge starts right
away. You will have filtered water
when the recharge is over in about
two hours.
VACATION
The day you leave on vacation or
other long absence, press and re-
lease (do not hold) the RE-
CHARGE button. "VAC" begins
to flash in the display. The timer
will keep time, but the filter will
not recharge and waste water.
When you return, press and release the RECHARGE
button again to return the filter to service, and the
correct time of day will show in the display. Remem-
ber to do this or the filter will not recharge and you
will soon have unfiltered water.
NOTE: While in VACATION, the filter will go
through a recharge if the RECHARGE NOW feature
is used.
To shut off the water supply to the filter, use the
plumbing bypass valve(s), Figure 9 on page 4-1.
ERROR CODE
An error code could appear in the faceplate display
if a problem occurs in the filter electronics. If you see
and error code instead of the present time of day,
please call the Kenmore Water Line at
1- 800- 426- 9345.
2-1
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line