Filter
Top Products
6
• For all cord connected appliances:
The microwave oven must be grounded.
In the event of an electrical short circuit,
grounding reduces the risk of electric shock
by providing an escape wire for the electric
current. The microwave oven is equipped
with a cord having a grounding wire with a
grounding plug. The plug must be plugged
into an outlet that is properly installed and
grounded.
Improper grounding can
result in a risk of electric shock. Consult a
qualied electrician or service technician if you
do not understand the grounding instructions, or if
you wonder whether the appliance is properly
grounded. Do not use an extension cord. If the
power supply cord is too short, have a qualied
electrician or service technician install an outlet
near the microwave oven.
• For a permanently connected appliance:
This appliance has a short power supply cord
to reduce the risk of anyone tripping over or
becoming entangled in the cord. The microwave
oven must be connected to a grounded, metallic,
permanent wiring system, or an equipment
grounding conductor should be run with the
circuit conductors and connected to the
equipment grounding terminal or lead on the
microwave oven.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet. Do not remove ground
prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
re, or electrical shock.
DANGER
Ensure proper ground
exists before use
MICROWAVE OVEN SAFETY
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the (c) Do not operate the oven if it is damaged. It
door open. Doing so can result in harmful is particularly important that the oven door
exposure to microwave energy. It is important closes properly and that there is no damage
not to defeat or tamper with the to the:
safety interlocks. (1) Door (bent)
(2) Hinges and latches (broken or loosened)
(b) Do not place any object between the oven (3) Door seals and sealing surfaces
front face and the door, or allow soil or
cleaner residue to accumulate on (d) The oven should not be adjusted or repaired
sealing surfaces. by anyone except for a properly qualied
service technician.
ELECTRICAL REQUIREMENTS
Observe all governing codes and
ordinances. A 120-Volt, 60-Hz, AC-only,
15 or 20-amp fused electrical supply is
required. A time delay fuse is recommended.
It is recommended that a separate circuit,
serving only this appliance, is provided.
GROUNDING INSTRUCTIONS
WARNING:
SAVE THESE INSTRUCTIONS