Filter
Top Products
Consumer Defined Control Features
Setting Temperature Display = Fahrenheit or Celsius:
The BROIL (J_B'r'oi_ii_;and FLEX CLEAN @ pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
iNSTRUCTiONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press _iii_Broi!i_
(Figure 1) and hold for 7 seconds; "550 °'. will appear and
"BROIL" will flash in the display and a beep will sound, if "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press @ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
O
3. Press to accept the change or press to reject the
change.
for7seconds
@
Figure 1
Figure 2
or Q Figure 3
Setting Oven Controls
ImportantThings to Know Before Setting any Basic Oven Cooking Function
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKE or BREAD
function with the oven set temperature automatically set for 350°R However if desired, the oven set temperature may be
adjusted at any time during the cooking process, You may also choose to add a COOKTIME or DELAY START with any of
the functions listed above,
Temperature Visual Display
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be shown
in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound to
remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast, cakes and breads.
NOTE: The lowest temperature that can be displayed is 100°F.
20