Filter
Top Products
Setting Surface Controls (cont'd)
To Set the Cooktop Lockout Feature 8COOKTOP
The clock L_ pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being
v
accidentally turned ON. This feature will only lock the cooktop.
INSTRUCTIONS PRESS DISPLAY
To turn the Cooktop Lockout Feature ON:
t. BE SURE ALL surface element controls are set to the OFF position.
2. Press and hold _ until "CLO" appears (Figure t). Continue
holding
until a second beep sounds (after 3 seconds). If a triple beep sounds
instead,check all surface elements and turn them to the OFF position
and repeat this step. I_1will appear in the display indicatingthe cooktop
controls and functions are locked out until the cooktop isunlocked (See
Figure2).
To turn the Cooktop Lockout Feature OFF:
t. BE SURE ALL surface element controls are set to the OFF position.
2. Press and hold _ until "CLO" appears. Continue holding until
a
second beep sounds (after 3 seconds). If a triple beep sounds
instead, check all surface elements and turn them to the OFF
position and repeat this step. I_1will disappear from the display
indicating the cooktop may be used normally (See Figure 3).
O
Figure t
Figure 2
Q
Figure 3
Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop Lockout feature. The cooktop will remain locked
until the Self-Clean cycle has completed and the oven door has unlocked. If a power failure occurs after the Cooktop
Lockout has been activated, you must turn OFF the Cooktop Lockout feature before being able to use the cooktop
features again.
13