Filter
Top Products
Setting Oven Controls
Setting Convection Convert feature
The CONV CONVERT _ pad is used to automatically convert a standard Baking recipe for convection baking.
When set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with the Convection Bake keypad. Cook Time or Delay Start function may be
added.
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe (example below when
setting oven for 350 °)
1. Arrange interior oven racks and place food in oven.
2. Press _-_ (Fig. 1). If a Cook Time or Delay Start Js
desired,
enter the times now.
3. Press _. "CONV BAKE" and the oven temperature
adjustment will appear briefly in the display (for this example it
is 325°F). A beep will sound once the adjusted oven
temperature is reached (Fig. 2).
Note: When used with a Cook Time or a Delay Start setting, the
Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (Fig. 3). At this time the oven
control will sound 3 long beeps at regular intervals until baking has
finished. When the bake time has completely finished the control
will display "End" and will sound 3 long beeps every 30 seconds
_ pad is pressed (Fig. 4).
until the
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(see Figs 2 or 3).
PRESS DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Press (i_o_)to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or Delay Start function is 20
minutes.
21