Kenmore 790.4802 Oven User Manual


 
Self=Cleaning
iNSTRUCTiONS
When the Self-Clean Cycle is Completed
1. The time of day, the "DOOR LOCKED", "CLEAN" and "HOT"
icon will remain in the display.
2. Once the oven has cooled down for approximately 1 HOUR,
and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened.
Stopping or interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press _).
2. Once the oven has cooled down for approximately 1 HOUR,
and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Fig. 1).
PRESS DISPLAY
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment
is needed.
INSTRUCTIONS PRESS
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
To adjust the oven temperature higher
1. Press _ for 6 seconds
(Fig. 2),
2, To increase the temperature use the number pads to enter the
change. (Example 30°F) _ (_) (Fig. 3).
desired The
temperature may be increased as much as 35°F (19°C).
3. Press _ to accept the temperature change and the display will
return to the time of day (Fig. 4). Press ___ to reject the change
if
necessary.
To adjust the oven temperature lower
1. Press _ for 6 seconds (Fig. 4).
2. To decrease the temperature use the number pads to enter the
change. (Example-30°F) (_ (_ and then press
desired
@ (Fig. 6). The be decreased as much as
temperature may
35°F (19°C).
3. Press _ to accept the temperature change and the display will
return to the time of day (Fig. 7). Press _i) to reject the change if
necessary.
G
G
(]D@
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
28