Filter
Top Products
Setting Oven Controls
Setting Convection Convert Feature
Setting Add 1 Minute Feature
To set the Convection Convert feature
The _ CONY CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When
set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.
INSTRUCTIONS
Using Convection Convert feature to adjust oven
temperature from a Bake recipe (example below
when setting oven for 375°F):
1. Arrange interior oven racks and place food in oven.
2. Press _, (See Fig. 2). if a Cook Time or a Delay Start
is desired, enter the times now.
3. Press _. "CONY BAKE" and the oven set temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven set
temperature isreached. (See Fig. 3).
PRESS DISPLAY
@
Fig. 1
Fig. 2
Notes: When used with a Cook Time or a Delay Start setting,
the Convection Convert feature will display a "CF" for check
food when the bake time is75% complete (See Fig. 3). At this
time the oven control will sound 3 long beeps at regular intervals
until baking has finished. When the bake time has completely
finished the control will display "End" and will sound 3 long beeps
every 30 seconds until the ('_ pad is pressed (See Fig. 4).
®
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)
Press _ to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or a Delay Start function is 20
minutes.
®
Fig. 3
Fig. 4
To Set Add I Minute Feature
The @ keypad is used to set additional minutes to the Timer. Each time the @ pad is pressed, another minute is
added. If the Timer is not active and the @ key pad is pressed, the Timer feature will become active and will begin
counting down from 1 minute. When the Timer reaches the end of the set time, "End" will display and signal 3 long beeps
at regular intervals until @ is pressed again.
26