Filter
Top Products
HUMiDiTY CONTROLLED CRISPER
The crispers provide fresher tasting fruit and vegetables by
letting you easily controt humidity inside the drawer.
You can control the amount of humidity in the moisture-
sealed crispers by adjusting the control to any setting
between VEGETABLE and FRUIT.
VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
FRUIT lets moist air out of the crisper for best storage
of fruit.
GLIDE 'N' SERVE
The Glide 'N' Serve provides storage space with a
variable temperature control that keeps the compartment
colder than the refrigerator temperature. This drawer can
be used for large party trays, deli items, or beverages.
NOTE: It is not recommended that this drawer be used for
fruits and vegetables.
COLD e o • TEMP. CONTROL • • o COLDER
Removing and installlng the humidity controlled crisper
1. To remove, putt the drawer out to futt extension.
2. Lift the front of the crisper up, then putt it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place.
Removing the glass
1. Lift up the glass under the crisper cover.
2. Putt the glass up and out.
NOTE: Pantry drawer not shown for clarity.
Glide 'N' Serve Control
The control regulates the air temperature in the drawer.
Set the control level to COLD to provide normal refrig-
erator temperature. Use the COLDER setting for meats or
other deli items.
NOTE: Cold air directed to the Glide 'N' Serve can
decrease the refrigerator temperature. It may be neces-
sary to adjust the refrigerator temperature.
To remove and replace Glide 'N' Serve
1. To remove, putt the drawer out to futt extension.
2. Lift the front of the crisper up, then putt it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place.
26
MFL62184418 DDDDD.indd 26 2011.4.7 11:54;25 AM