Filter
Top Products
LIGHT BULB REPLACEMENT
Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.
NOTE: The refrigerator compartment lights Have LED
interior lighting, and service should be performed by a
qualified technician.
CHANGE FREEZER COMPARTMENT LIGHT BULB
1. Unplug refrigerator power cord form outlet.
2. Remove the screw using a Phillips screwdriver.
3. Grasp the light cover and pull the cover
downward.
_, CAUTION: Make sure that the bulb is cool to
the touch.
4. Rotate the bulb counterclockwise to remove.
5. Replace with a new 60=watt appliance bulb.
6. insert tabs on back of cover into slots in freezer
ceiling. Push cover up to snap front into place.
7. Tighten the screw using a Phillips screwdriver.
POWER INTERRUPTIONS
1. if the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
frozen.
2. If the power will be out for more than 24 hours, remove
all food and store it in a different refrigerator or frozen
food locker.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while you are
away, follow these steps to prepare your refrigerator
before you leave.
1. Use up any perishables and freeze other items.
2. Turn off the icemaker and empty the ice bin.
If you choose to turn the refrigerator off before you leave,
follow these steps.
lo
2.
o
4.
Remove all food from the refrigerator.
Depending on your model, set the thermostat control
(refrigerator control) to OFF. See the Setting the
Controls section.
Clean the refrigerator, wipe it and dry well.
Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.
WHEN YOU MOVE
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable parts, wrap them well and
tape them together so they do not shift and rattle
during the move. Refer to the Using your Refrigerator
section for removable instructions.
5. Depending on the model, raise the front of the
refrigerator so it roils easier OR screw in the leveling
legs all the way so they do not scrape the floor. See
the Door Closing section.
6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and
refer to the Refrigerator Installation section for preparation
instructions.
33
MFL62184418 DDDDD.indd 33 2011.4.7 11:54;37 AM