Filter
Top Products
ApplyTeflon tape or ptpejo=nt
compound • to 90° elbow httmg 0
and connect fitttng to water =nletvalve
0. Hold bracket (_ with phers Ttghten
elbow unttl snug, and be sure that tt
faces to the rear.
Remove terminal box cover _ Pull
apphance wtres@ through hole m
termmal box
If you are direct wiring: install a U L.-
hsted/CSA-certd_edclamp connector @
to the terminal box If using condu_t,
use a U L -listed/CSA-certtfied conduit
connector.
If you are installing a power supply
cord kit, do so now and follow kit
instructions.
_f L: t t: .f; ]
1
HELPFUL TIP:
Put cardboard under dishwasher
until it is installed in cabinet
opening. The cardboard will help
protect floor covering during
Installation.
Measure hetght of cabinet opening from
undersideof countertop to floor where
dishwasher will be installed0 (you
need the lowest point) Check chart for
that hetght openmg Put wheels (D in
the requtred posttion.
MIn. Wheel position
c.tou! height (see illustration)
34- (86.4cm) 1
34-1/8"(86.7cm) 2
34-511S"(872cm) 3
34-1/2"(87.6cm) 4
continuedonpage15 14