Filter
Top Products
15
Consumer Dened Control
Note: The Consumer Dened Control features are adjustments
to the control that will not aect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control
Operation features
Setting Oven Lockout Feature
The Stop pad controls the Oven Lockout feature. The Oven
Lockout feature automatically locks the oven door and prevents
the oven from being turned on. It does not disable the display
of the clock, the Kitchen Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold Stop for 3 seconds.
2. After 3 seconds “door Loc” will appear, a beep will sound
and “DOOR LOCKED” will ash in the display. Once the
oven door is locked the “DOOR LOCKED” indicator will
stop ashing and remain on along with the “Loc”.
To reactivate normal oven operation:
1. Press and hold Stop for 3 seconds. A beep will sound. The
“DOOR LOCKED” will ash in the display until the oven
door has completely unlocked.
2. The wall oven is again fully operational.
To Set the Cooktop Surface Feature
The pad is used to activate the Cooktop Lockout feature
which will lock all surface elements from being accidentally
turned ON. This feature will only lock the cooktop.
To turn the Cooktop Lockout Feature ON:
1. BE SURE ALL surface element controls are set to the OFF
position.
2. Press and hold
until one beep is heard. If a triple beep
sounds instead, check all surface elements and turn them
to the OFF position and repeat this step. The Cooktop
Locked icon
will turn ON and the cooktop controls and
functions are locked out until the cooktop is unlocked.
To turn the Cooktop Lockout Feature OFF:
1. BE SURE ALL surface element controls are set to the OFF
position.
2. Press and hold
until one beep is heard (after 3 seconds).
If a triple beep sounds instead, check all surface elements
and turn them to the OFF position and repeat this step.
The Cooktop Locked icon
will turn OFF and the cooktop
may be used normally.
Important notes:
- Starting a Self-Clean cycle will also turn ON the Cooktop
Lockout feature. The cooktop will remain locked until the
Self-Clean cycle has completed and the oven door has
unlocked.
- If a power failure occurs after the Cooktop Lockout has been
activated, you must turn OFF the Cooktop Lockout feature
before being able to use the cooktop features again.
Setting Temperature Display
The Broil and Clean pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display in
Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
Broil and hold for 7 seconds. If “F” appears, the display
is set to show temperatures in Fahrenheit. If “C” appears,
the display is set to show temperatures in Celsius.
2. Press Clean to switch between Fahrenheit or Celsius display
modes. The display will show either “F” or “C”.
3. Press Start to accept the change or press Stop to reject
the change.
Setting Silent Control Operation
The Delay Start and Clean pads control the Silent Control
operation feature. The Silent Control operation feature
allows the oven control to be operated without sounds or
beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to
operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold Delay Start. “ -- --” will appear and “DELAY”
will ash in the display. After 7 seconds “bEEp On” will
appear in the display.
2. Press Clean to switch between normal sound operation and
silent operation mode. The display will show either “bEEp
On” or “bEEp OFF”.
If “bEEp On” appears, the control will operate with normal
sounds and beeps. If “bEEp OFF” appears, the control is
in the silent operation mode.
3. Press Start to accept the change or press Stop to reject
the change.
Note: The control will always beep at the end of a kitchen
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
Setting Oven Controls