Filter
Top Products
centrifugal juicer (if supplied)
U
se the centrifugal juice for making juice from firm fruit and
v
egetables.
ቢ
pusher
ባ lid
ቤ
strainer
ብ
inner bowl
to use the centrifugal juicer
1 Fit the drive shaft and bowl onto the power unit.
2 Lock the strainer into the inner bowl .
3
Fit the inner bowl into the processor bowl .
4 Place the attachment lid onto the bowl, turn until it locks and the
feed tube sits over the handle .
5 Cut the food into small pieces to fit the feed tube.
6 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube. Process fully before adding
more.
7 After adding the last piece, let the machine run for a further 20
seconds to extract all the juice from the strainer.
important
●
If the processor vibrates, switch off and empty the strainer (The
processor vibrates if the pulp becomes unevenly distributed).
●
Process small amounts at a time (450g maximum) and empty
the strainer and inner bowl regularly.
●
Before processing remove stones and pips (eg pepper, melon,
plum) and tough skins (eg melon, pineapple). You don’t need to
peel or core apples and pears.
hints
●
Use firm, fresh fruit and vegetables.
●
Citrus juice will be bitter and frothy because its peel and pith get
processed too. Use the citrus juicer instead.
KENSTORE™ attachments carousel
(if supplied)
Your food processor is supplied with an attachment storage
carousel that fits inside the bowl.
to use the storage carousel
1 Fit the knife blade to the bowl.
2 Then fit the whisk, discs and canopy into the carousel .
3 Fit the carousel over the knife blade and place the processor lid
on top .
care & cleaning
●
A
lways switch off and unplug before cleaning.
●
Handle the blades and cutting discs with care - they are
e
xtremely sharp.
●
S
ome foods may discolour the plastic. This is perfectly normal
and won’t harm the plastic or affect the flavour of your food. Rub
w
ith a cloth dipped in vegetable oil to remove the discolouration.
p
ower unit
●
W
ipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
●
S
tore excess cord in the storage area at the back of the
m
achine .
liquidiser and mini chopper/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2
Wash the jug/jar by hand.
3 Remove and wash the seals.
4 Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
●
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
●
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
●
Wash by hand, then dry.
●
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.
service & customer care
●
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
●
If you experience any problems with the operation of
the processor, before calling for assistance refer to
the troubleshooting guide.
UK
If you need help with:
●
Using your appliance
●
Servicing or repairs (in or out of guarantee)
టcall Kenwood on 023 92392333 and ask for customer care.
Have your model number ready - it’s on the underside of
the appliance.
●
spares and attachments
టcall 0844 557 3653.
other countries
Contact the shop where you brought the appliance.
●
Designed and engineered by Kenwood in the UK.
●
Made in China.
7