Kenwood TTM310 Toaster User Manual


 
In order to monitor the progress of
the toasting, the sandwich cage can
be lifted up without cancelling.
7To stop toasting at any stage, press
the cancel button. The toaster will
emit an audible beep to indicate
toasting is cancelled and the button
lights will go out.
8 When toasting is nearly finished the
toaster will emit an audible beep and
after a slight delay the button lights
will go out and the toasting will stop.
The food item will NOT pop up.
9 Leave the toasted food item to stand
for 1 minute inside the toaster before
serving.
10 Remove the sandwich cage then
open it up and tip the food item onto
a plate.
11 After using, unplug the toaster.
CAUTION:
The sandwich cage will be
very hot, ensure it is placed
on a heat resistant surface
and take care when handling.
Ensure ingredients are piping
hot throughout before serving.
Take care when biting into the
food items as the fillings can
be very hot.
5
power level food item examples setting range
recommended
Bagel • Bagels 4-6
For toasting one •Crumpets 6-8
side only Hot cross buns 3-5
•Teacakes 3-5
High Pre-sliced shop bought bread 4-6
•Toasting waffles 4-6
Low Filled half size ciabattas 9-10
Pains au chocolat 3-5
Unsliced bread 4-6
Scotch pancakes 2-4
Filled croissants 4-6
Filled sandwiches 6-8
hints & tips:
Don’t make the slot width too narrow or close the sandwich cage too tightly
and squash the food item.
Slices should be cleanly cut and not have ragged edges.
For frozen bread use a browning control setting higher than you would
normally use for the type of bread.
Cut ingredients thinly - do not use large chunks.
Dry/stale bread toasts more quickly than fresh bread and thinly sliced bread
toasts more quickly than thickly sliced bread. Therefore the browning control
should be set at a lower setting than usual.
For best results ensure that the bread slices are of an even thickness,
freshness and size.
In order to achieve uniform browning, we recommend you wait a minimum of
30 seconds between each toasting so that the control can automatically
reset. Alternatively select a lower browning control setting when additional
toasting is carried out.
hints & tips on using your toaster
These are recommendations only. After a short period of use, experience will
teach you which setting is the right one for your needs. It is advisable to initially
start off with a lower setting until you become familiar with the toaster.