Filter
Top Products
6
5. After removal of Top Plate, the Descaling Solution Access Port in the Water
Reservoir will be clearly evident as shown below.
6. Reconnect the brewer to AC Power Supply.
7. Proceed with descaling procedure as defined below:
De-Scaling Procedure
Preparation:
Prepare at least 40 ounces of a commercial citric acid descale solution. You will
also need a large ceramic mug (a paper cup is not suitable for this procedure) and access
to a sink for discarding hot liquid.
FILL AND CLEAN
1. Pour 40 ounces of descale solution into the Cold Water Tank through the Access
Port shown above and turn on the brewer – the brewer will automatically fill and
begin heating.
2. When the brewer display shows “Ready To Brew” place the ceramic mug on the
drip tray, select the largest brew volume, and press the Brew button
NOTE: Do not use a K-Cup portion pack
3. Once the solution begins to exit the brewer, lift the Brew Head Handle just
enough to halt the brew process and let the brewer sit for 40 minutes in this state.
Pour
Descaling
Solution
here