Keurig V700 Coffeemaker User Manual


 
SECTION 4
Setting the Time & Temperature
SECTION 5
Caring For Your Brewer
Setting the Brew Temperature
The Brewer has a preset temperature of 192° F. You can
adjust the temperature up or down in 1 degree increments
within the Brewer range (187° - 197° F). Once set, your
beverages will be brewed at the selected temperature.
At high altitudes if boiling occurs, use the temperature
adjustment to lower the temperature so that boiling
does not occur.
Here is how to set the brew temperature:
Step 1
Select the settings icon
on the Touchscreen,
then select “Temperature.”
Step 2
This screen will allow you to set the temperature
using the + and - buttons.
Step 3
Once the temperature has been set, select “SET” and you
will be returned to the Settings Menu. Select the back
arrow to return to the previous screen.
Cleaning & Maintenance
CLEANING EXTERNAL PARTS
Cleaning of the Brewer’s external parts is recommended
one to two times per month. Never immerse the
Brewer in water or other liquids. The Housing and other
external parts may be cleaned with a soapy, damp,
non-abrasive cloth.
The Drip Tray can accumulate up to 13 oz. of overflow.
The Drip Tray and the Adjustable Drip Tray Plate should be
periodically inspected and rinsed clean. To remove the Drip
Tray, simply slide it toward you, keeping it level at all times to
avoid spilling. The Drip Tray should be cleaned with a soapy,
damp, non-abrasive cloth. The Drip Tray and Adjustable
Drip Tray Plate should not be put in the dishwasher.
CLEANING THE BREW HEAD
Step 1 Lift the Brewer Handle.
Step 2 Grip and press the buttons on both sides of
the Brew Head and tilt it down.
Step 3 Pull the Brew Head toward you to remove.
Carefully clean the Brew Head with a soapy, damp,
non-abrasive cloth and rinse thoroughly. The Brew
Head should not be placed in the dishwasher.
Return the Brew Head by sliding it gently back into place
until you hear a click. Lower the Brewer Handle and you
are ready to brew again.
CLEANING THE WATER RESERVOIR &
WATER RESERVOIR LID
The Water Reservoir and Lid should not be put
into the dishwasher. Clean them with a damp, soapy,
non-abrasive cloth and rinse thoroughly. Do not dry
the inside of the Water Reservoir with a cloth as lint
may remain.
CAUTION: Rinse the Water Reservoir thoroughly after cleaning
to ensure that no cleaners or cleaning solutions remain in this
area as they may contaminate the water supply in the Brewer.
Lift to Brew
Time
Temperature
Settings
Temperature
(187º - 197º F)
192
°
F
SET
1
2
3
20 21