Filter
Top Products
SECTION 3
Using Your Brewer
SECTION 3
Using Your Brewer
Prepare Your Cup
Fill a 16 oz. plastic cup with ice. Do not use glass.
Remove the Drip Tray if necessary and place cup
under the Brew Head.
Brewing Over Ice
Choose Vue
™
Cup
Portion Pack
Make sure your Vue
™
Cup
features the Brew Over Ice Icon.
Lift the Brewer Handle, insert
the Vue
™
Cup into the Holder
and lower the Brewer Handle.
Select Beverage Type & Size
Select the “Brew Over Ice” tab. The Touchscreen will
display as pictured.
If making iced coffee, ensure “Iced Coffee” remains
highlighted. If making iced tea or iced café drinks,
select the correct beverage type.
Select your beverage size using the + and - buttons
at the bottom of the Touchscreen.
* Available sizes for Iced Café are 6 oz. and 8 oz.
oz8
Iced Café
Tea +Iced Tea/Other
Strong
Café
Coffee & Tea
Brew Over Ice
Iced Coffee
Available Sizes*
What is a Cleansing Brew?
After brewing certain Vue
™
Cup portion pack varieties such
as hot cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew to clear your Brewer of traces
of the previous beverage. It is an easy 3-step process:
Step 1 Take a used Vue
™
Cup and peel off the lid. Discard
the lid and any filter which adheres to it. Ensure
the empty Vue
™
Cup is clean.
Step 2 Place the EMPTY Vue
™
Cup in the Brewer and
place a mug on the Drip Tray.
Step 3 Lower the Handle and press “BREW.” The Brewer
will dispense 8 oz. of hot water into your mug
and cleanse the Brewer. Once complete, discard
the water and carefully remove the Vue
™
Cup.
The cleansing is complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the Brewer off.
The beverage flow will stop and the Brewer will shut off.
The Vue
™
Cup will be HOT after brewing. Use caution when
removing. Allow it to cool completely before handling.
To turn the Brewer back on, place an empty mug on the
Drip Tray and press the Power Button. Since the previous
brew was interrupted, some water may drip into the mug
during preheating.
We recommend that you perform a cleansing brew before
brewing your next beverage (see above). If this is not done,
the Brewer may deliver an additional amount of water for
your next beverage.
Dispensing Hot Water
If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head.
Place your cup or bowl as far back as possible. Lift and
lower the Handle WITHOUT inserting a Vue™ Cup. Select
“Coffee” (do not select “Strong”) and press “BREW.” The
Brewer will dispense hot water into your cup or bowl.
Step 1
Step 2
Step 3
Press
& Enjoy!
Do not remove mug or lift the Brewer Handle until “Enjoy!”
appears on Touchscreen.
Remove the Vue
™
Cup after brewing is complete.
The Vue
™
Cup will be HOT after brewing. Use caution when removing.
Allow it to cool completely before handling.
14 15