KitchenAid 5KSM45 Mixer User Manual


  Open as PDF
of 18
 
10
ASSEMBLING THE STAND MIXER
Attaching/removing the at beater, wire whip, or dough hook
1
To attach accessory: Turn speed
control to “O”. Unplug Stand Mixer.
2
HoldthelockingleverintheUNLOCK
positionandtiltmotorheadback.
3
Slip accessory onto beater shaft and
pressupwardasfaraspossible.Then,
turnaccessorytotheright,hooking
accessory over the pin on the shaft.
NOTE: Motor head should always be in LOCK position when using the Stand Mixer.
Lifting/lowering the motor head
1
To lift motor head:Pushthelocking
lever to the UNLOCK position and lift
thehead.Oncelifted,theleverwill
automaticallygobackinLOCKposition
tokeeptheheadlifted.
2
To put down motor head: Push the
lockinglevertoUNLOCKandgently
bringtheheaddown.Thelockinglever
willautomaticallygobackinLOCK
position when the head is down. Before
mixing,testlockbyattemptingtoraise
motor head.
ASSEMBLING THE STAND MIXER
W10572619A_01_Final.indd 10 4/12/13 8:41 AM
 previous next