KitchenAid 5KSM45 Mixer User Manual


  Open as PDF
of 18
 
12
* Included only in models 5KSM150PS and 5KSM45. Also available as optional accessory.
Using the pouring shield*
1
Forbestresults,rotatetheshieldsothe
motor head covers the U-shaped gap
in the shield. The pouring chute will be
justtotherightoftheattachmenthub
as you face the Stand Mixer.
2
Pour the ingredients into the bowl
through the pouring chute.
ASSEMBLING THE STAND MIXER
Placing/removing the pouring shield*
4
Lift the front of the pouring shield
clear of the bowl rim and pull forward.
Remove attachment and bowl.
3
To Remove pouring shield: Turn
speed control to “O”. Unplug Stand
Mixer.
1
To place pouring shield: Turn speed
control to “O”. Unplug Stand Mixer.
Attachyourchosenaccessory,see
“Attaching/removingtheflatbeater,wire
whip,ordoughhook”section.
2
FromthefrontoftheStandMixer,slide
the pouring shield over the bowl until
the shield is centered. The bottom rim
of the shield should fit within the bowl.
Usethepouringshieldtoavoidhavingingredientssplashingoutofthebowlwhenmixing,
as well as to easily pour ingredients in the bowl while mixing.
OPERATING THE STAND MIXER
W10572619A_01_Final.indd 12 4/12/13 8:41 AM
 previous next