Filter
Top Products
8
48 in. (122 cm) Models
Bottom Mount Models Door Swing Dimensions
Location must permit doors to open to a minimum of 90°. For
panel models, allow 1 in. (2.5 cm) minimum space between
refrigerator side and corner wall. For wraparound models, allow
4
¹⁄₂
in. (11.4 cm) minimum space between refrigerator side and
corner wall. To adjust door swing see the “Adjust Doors” section.
36 in. (91 cm) Models
Factory Panels and Kits
Side by Side Panel and Handle Kits
All factory parts are available through your KitchenAid dealer or
by calling KitchenAid Parts and Accessories at
1-800-442-9991
.
Factory Door Panels Kits
Four kits containing colored acrylic or stainless steel door and
top grille panels are available. Follow the kit instructions for
installing the panels.
NOTE:
Panel kits are not required for factory-installed stainless
steel panel models or wraparound door models.
Door Panel Part Numbers for Non-dispenser Models
Door Panel Part Numbers for Dispenser Models
Extended Door Handle Kits
Use extended door handles when additional finger clearance is
needed between door handles and custom panel. Follow the kit
instructions for installing the door handles.
130˚
130˚
90˚
90˚
110˚
110˚
50
1
/2"
(128 cm)
45
1
/4"
(115 cm)
26
3
/4"
(68 cm)
19
3
/4"
(50 cm)
40"
(102 cm)
43
1
/2
"
(110 cm)
130˚
90˚
23"
(58 cm)
51"
(130 cm)
59"
(150 cm)
Color 36in.
(91 cm)
42 in.
(106 cm)
48 in.
(122 cm)
White #2220852 #2220853 #2220854
Black #2220855 #2220856 #2220857
Biscuit #2220858 #2220859 #2220860
Stainless
Steel
#2220861 #2220862 #2220863
Color 36 in.
(91 cm)
42 in.
(106 cm)
48 in.
(122 cm)
White #2220864 #2220865 #2220866
Black #2220867 #2220868 #2220869
Biscuit #2220870 #2220871 #2220872
Stainless
Steel
#2220873 #2220874 #2220875
Color Part Number
White #4387990
Black #8171418
Biscuit #8171417
Stainless Steel #4388062
Matte Aluminum #4387989