Filter
Top Products
4-12
REMOVING THE DUAL BROIL ELEMENT
AND THE HIDDEN BAKE ELEMENT
1. Unplug range or disconnect power.
2. Open the oven door and remove the racks
from inside the oven.
3. To remove the dual broil element:
a)Remove the two screws from the dual
broil element brackets.
b) Pull the element forward and unhook
the front bracket tabs from the liner
slots, then pull the element wires
through the liner holes, and disconnect
them from the terminals.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Dual Broil Element
2 Red Wires Blue & Violet Wires
4. To remove the hidden bake element:
a) Remove the right side panel (see page
4-19 for the procedure).
b) Spread the insulation away from the
front of the hidden bake element.
Bracket Screws
Tab
Tab
Insulation