Filter
Top Products
4-14
REMOVING THE CONVECTION
BAKE ELEMENT & FAN MOTOR
1. Unplug range or disconnect power.
2. Open the oven door and remove the racks
from inside the oven.
Screw &
Lockwasher
Screw &
Lockwasher
Convection Fan
Motor Cover
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
3. Remove the two screws from the convec-
tion fan motor cover, then unhook the
bottom tab from the liner slot, and remove
the cover.
Convection Bake Element & Fan Motor
4. To remove the convection bake ele-
ment:
a) Remove the three screws from the ele-
ment bracket and bottom clip.
Convection Bake Element Bracket Screws
Cover Tab
Bottom Clip Screw