Filter
Top Products
11
English
ASSEMBLING THE FOOD PROCESSOR
4
Install the work bowl cover, being sure it
locks into place.
3
Lower the slicing blade and slicing
adapter onto the drive adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
ASSEMBLING THE FOOD PROCESSOR
Adjusting the slicing thickness
1
Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
Thicker
Thinner
Installing other slicing or shredding discs
1
Holding the desired disc by the 2 finger
grips, insert the disc adapter into the
hole in the bottom of the disc.
2
Slide the drive adapter into the disc
adapter as far as it will go, until it clicks
into place.
IMPORTANT: When using the reversible shredding disc, have the desired side
(medium/fine) facing UP.