Filter
Top Products
12
Installing the Adjustable
Slicing Disc
Setting Up Your Food Processor
1. With the work bowl installed, place the
drive adapter on the power shaft of the
base.
TIP: You may need to turn the disc/drive
adapter until it drops down into place.
3. Lower the slicing blade and slicing adapter
onto the drive adapter.
IMPORTANT: The adjustable slicing disc
can only be installed in one direction.
4. Install the work bowl cover, being sure it
locks into place.
2. Holding the adjustable slicing disc by
the 2 nger grips, align the pins onto the
adjustable slicing disc adapter into the
L-slots on the disc. Slide the disc down
onto the adapter and turn to engage the
pins in the L-slot.
Adjusting the Slicing
Thickness
Set the desired slicing thickness by moving
the lever to the left for thinner slices or to
the right for thicker slices.
Thicker
Thinner
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
W10407578A_ENv2_bk.indd 12 7/1/11 5:45 PM