Filter
Top Products
6-1
DIAGNOSTICS & TROUBLESHOOTING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
Error Description Burners Solution
F0 No communications between the touch 2 or 4 1. Unplug cooktop or disconnect power.
control and electronic boards. 2. Check the electronic board connections.
3. If failure remains, replace the electronic board.
FOP No communications between the right — 1. Unplug cooktop or disconnect power.
and left electronic boards. 2. Check the electronic board connections
(CNT7-CNT6) and the relay board connection.
3. If failure remains, replace the relay board.
4. If failure remains, replace the right electronic
board.
5. If failure remains, replace the left electronic
board.
e0 Electronic board failure (shorted or 2 1. Replace electronic board.
damaged component).
e1 Electronic board failure (problem in 1 1. Replace electronic board.
damaged component).
e2 Fan will not operate. 2 or 4 1. Check fan connection.
2. Replace electronic board.
e3 NTC open. 1 1. Replace the NTC sensor.
e4 NTC shorted. 1 1. Replace the NTC sensor.
c1 Insufficient line voltage (<185 VAC). 2 or 4 1. Error disappears with correct line voltage.
c2 Inductor temperature failure. 1 1. The cooktop has overheated. Turn off and
allow to cool.
c3 Radiator temperature failure. 1 1. The cooktop has overheated. Turn off and
allow to cool.
ELECTRONIC BOARD ERROR CODES