Filter
Top Products
2. Wash the reservoir in hot, soapy water and rinse with clean
water. The reservoir can also be washed in the top rack of
the dishwasher.
3. Place the reservoir back into the espresso machine, making
sure the water tubes are placed inside the reservoir. The ribs
on the bottom of the reservoir fit into the grooves on the
base of the housing.
Fill & Rinse the Boilers
The boilers need to be filled and rinsed before the espresso
machine is used for the first time. The boilers will also need to be
filled when:
• the espresso machine is not used for a prolonged period
• the water reservoir runs dry during use (this can damage the
espresso machine)
• multiple beverages are steamed without brewing espresso or
dispensing hot water
1. Slide the water reservoir left or right to expose the top, and
fill with fresh cold water to the max fill line.
NOTE: Distilled water or mineral water can damage the espresso
machine. Do not use either to brew espresso.
FEATURES AND OPERATION
13
Continued…
Attach the Cup Rail
Align the three rail posts with the holes on top of the espresso
machine. Then press the rail posts firmly into the holes.
Remove & Wash the Water Reservoir
1. Lift the reservoir slightly, then remove by pulling the bottom of
the reservoir from the espresso machine.
PREPARING THE
ESPRESSO MACHINE FOR USE