KitchenAid KPES100 Espresso Maker User Manual


 
TROUBLESHOOTING
If the power on indicator remains off and the boilers fail
to heat when the On/Off Power Switch is pressed:
Check to see if the espresso machine is plugged in; if it is, unplug
the espresso machine, plug it back in, and press the On/Off Power
Switch again. If the espresso machine still does not operate, check
the fuse or circuit breaker on the electrical circuit the espresso
machine is connected to and make certain the circuit is closed.
If coffee does not flow from the portafilter, the…
water reservoir may be empty, or the brewing boiler may
not be filled
reservoir siphon hose may be kinked or improperly placed
shower screen may require cleaning
espresso machine may need to be descaled
coffee may be too finely ground
coffee may be too firmly tamped
If the water pump is noisy, the…
water reservoir may be empty
reservoir siphon hoses may be kinked or improperly placed
boilers may not be filled
If water leaks from the portafilter…
the portafilter may not be properly attached to the brew head
coffee grinds may be clinging to rim of portafilter or brew
head gasket
the brew head gasket may be dirty or worn
If little steam or froth is being produced, the…
frothing boiler may not be at operating temperature
Steam Dial may not be completely open
frothing nozzle may be need to be cleaned
water reservoir may be empty, or the frothing boiler may
not be filled
If the problem cannot be fixed with the steps above, see the
KitchenAid Warranty and Service section on page 37.*
*DO NOT return the Espresso Machine to the retailer – they do not provide service.
26