Filter
Top Products
4-25
REMOVING A ROLLER
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
2. Remove any food or beverage that can
spill or be damaged from the refrigerator
and freezer compartments.
3. Pull the refrigerator out of its mounting
location.
4. If possible, tip the unit to access the front
or back rollers. If tipping is not possible,
use a piece of wood, (2″ x 4″), and prop up
the cabinet side at the front or rear of the
unit (depending on the roller you are re-
placing). Only prop up the outside edge of
the cabinet and not the bottom frame. The
frame must be free to move in order to
access the roller pin.
5. Turn the adjustment rod to remove it from
the roller.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Roller Adjustment Rod
Roller Bracket
6. Remove the T-40 Torx bolt from the bot-
tom frame.
7. Pull the bottom frame down to expose the
roller pin. Pull the pin out of the roller and
remove it.
T-40 Torx Bolt
Bottom Frame
Cabinet
Bottom
Remove Roller Pin
Pull Bottom
Frame Down
Remove Roller