Filter
Top Products
10
Changing the Light Bulb
1) Make sure all control switches are off and range hood is unplugged. CAUTION: Wait until
light is cool to the touch before changing.
2) Use a flat head screwdriver to pop out the protective covering.
3) Gently pull out the defective halogen light and discard. Plug in new halogen light (12V 20W
max.).
4) Replace protective cover.
5) Plug in range hood.
12V20W
Troubleshooting Guide
Problem Solution
Light does not turn on. Check power is plugged in.
Check light bulb.
Fan is not turning. Check power is plugged in.
Check electrical wires if connected correctly.
Check for loose wires.
Check switch
Keyhole