Filter
Top Products
7
3) Follow installation instructions from the section For Mounting on a Cabinet with a Flush
Bottom.
Making The Electrical Connection (SHOULD BE DONE BY A LICENSED PROFESSIONAL)
----SAFETY WARNING----
INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE
WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE
HOOD FOR CLEANING OR SERVICING.
CAUTION: MAKE SURE ELECTRICAL POWER IS TURNED OFF BEFORE STARTING
THIS SECTION.
1) After turning off the electrical power at the main power source, push the electrical power line
through the access opening drilled earlier in the wall or bottom of the cabinet. There are three
different color wire strands to be connected. Strip solid wire 5/16” and strip stranded wire
3/8”.
2) Connect the power line wire to the grounding green lead supplied with the hood.
3) Make the electrical connections by fastening the black power wire to the black wire and the
white power wire to the white wire located in the electrical wiring compartment. Align any
frayed strands or conductors. Screw on conductors; push wires firmly into connectors when
starting. Stop when the bottom of the connector reaches conductor. Follow all codes.
4) Plug into electrical outlet. Turn on power and check operation of fans and light.
{Fig.7}
Congratulations, your KOBE range hood is ready to use!
White Wire (Neutral)
Black Wire (Power)
Green Wire (Ground)