Filter
Top Products
- 10 -
Setting the kitchen timer
The microwave has a kitchen timer, which you can
use independently with microwave operation.
1. Press button
u
„Kitchen timer“ if the appliance
is in standby mode. The LED display shows a
flashing „0:00“ and the red clock symbol
lights up.
2. Now set the desired time by using the dial
a
.
You can select any time range from 5 seconds
to 95 minutes.
3. Press button
s
„Start/quick start“. An acoustic
signal is issued and the read clock symbol
flashes. The count down begins.
As soon as the set time is expired, you will hear a
repeated acoustic signal. Press the button „Can-
cel/Stop“
i
to stop the acoustic signal.
Note: While the Kitchen timer is running, the
current time cannot be displayed.
Operation
Cooking in the microwave oven
If you wish to use the classical basic functions of
the microwave (reheat, boiling, cooking), you must
simply select the microwave power and set the desi-
red cooking time. You can choose between eight
power levels from 100 to 800 watts, with a maxi-
mum cooking time of 95 minutes.
1) Select power
• Press the button
o
„Power“ the appropriate
number of times to set the required power level.
• 1x for 800 watt power.
• 2x for 700 watt power.
• 3x for 600 watt power.
• 4x for 500 watt power.
• 5x for 400 watt power.
• 6x for 300 watt power.
• 7x for 200 watt power.
• 8x for 100 watt power.
The power is shown in the LED display (e.g. P 800
at 800 watts power).
2) Setting the cooking time
1. Turn the dial
a
to set the cooking time.
The increments for setting the time with the
control knob are as follows:
• from 0 to 1 min: in 5 second increments
• from 1 to 5 min: in 10 second increments
• from 5 to 10 min: in 30 second increments
• from 10 to 30 min: in 1 minute increments
• from 30 to 95 min: in 5 minute increments
3) Start the cooking process
To start the cooking process, please press button
s
„Start/quick start“. In the LED display, the symbols
for microwave operation and cooking
appear. The count down begins.
Note: If you press button
s
„Start/quick start“
during operation, the cooking time will be in-
creased by 30 seconds, while the power
level remains unchanged.
Interrupting processes (Cancel/Stop)
You can stop a process, interrupt it and then conti-
nue.
Aborting/stopping an input process
Press button
i
„Cancel/Stop“ once, to abort or
stop an input process. The appliance switches back
to standby mode.
Interrupting the cooking process
Press button
i
„Cancel/Stop“ once to interrupt
a cooking process. The appliance interrupts the coo-
king process and stops the remaining time.
Press button
s
„Start/quick start“, to continue the
cooking process.
IB_KH1106_E5166_GB_LB6 19.11.2007 15:05 Uhr Seite 10