Filter
Top Products
SlPECIAL
FEATURES
Cycle
Completion Signal
At the end of
a
wash cycle, the beeper will
1.
Open door, hold down "Delay Start Hours"
sound off two times, and again every
15
nin-
button and simultaneously turn dishwasher on.
until the clishwasher
is
turned
2.
The display will blink with a code of
'0';
'1"
or
'2".
3.
Release the buttons. You are in program mode.
If the display blinks with a
'0';
you will hear no signal (indicates
OFF).
-
If the display blinks with
a
'1';
you will hear a
LOW
volume signal.
If
the display blinks with a
'Y,
you will hear a HIGHER volume signal.
4.
To change program code, press the "Delay Start
Hours" button.
5.
When you have the desired code selected, turn
the dishwasher off to take
it
out of program
mode.
Accomodaling
Extra
Tall
Items
If you have extra tall items that cannot fit in the
bottom rack without interfering with the upper spray
arm or without hitting the top rack (max, height
22"),
you can remove the upper rack.
A
special accessory,
the Extra Tall Item Sprinkler, lets you run the dish-
washer with top rack removed: See Figures
31
and
32.
Installing
"Extra Pall
Item
Sprinkler"
1.
With
top rack empty, remove
it
from the
dish-
washer by pulling the rack toward you to the
point where you can
lift
it
up and out, dis-
engaging the wheels from the side rails.
2.
Place the "Extra Tall Item Sprinkler" over the
top rack spray outlet at the back of the dish-
washer tub and turn
it
clockwise to lock the
sprinkler head in place. See Figure
32.
3.
Place the extra tall items
in
the bottom rack
for washing, as shown in Figure
31.
To
remove the Extra Tall Item Sprinkler, turn
it
counterclockwise and pull
it
out. Then replace
the top rack.
Figure
31
Nate:
Bs
$$are
ka
semo~e
We
E&ra
Tall
Xtem
Sprinkler
be-
foe
you
r43fmeli
&e
tags,
rack,
athewise
%he
da~r
co~tfd
be-
came
elantaged
and
not
close
praperliy.
---
*-
-
-
-
-
Figure
32
ENGLISH
-
3.7